Our proprietary formulation, is the definitive detergent against Carbon build up & FOG
•Safe for People
•Safe on Environment
•Safe on Equipment
•Safe on Aluminum
Drains down regular floor drain
CarbonZyme® has the same classification as hand soap. See MSDS for details.
How D-CARBONATOR® Works
The DECARBONATOR soaks equipment in a heated solution of water and detergent that is maintained at a constant temperature of 185° F.
HOW TO OPERATE the D-CARBONATOR
Fill the D-CARBONATOR® with clean hot water to the -H2O- Line
Reset the MONTHLY TIMER
Plug the D-CARBONATOR® into the electrical outlet and switch on
Add the CarbonZyme® and stir the solution
SOLUTION REMAINS FOR A MONTH!
Load the D-CARBONATOR® with equipment such as pots, pans, hood filters and more. Use the lifting basket to lower the items into the appliance.
Leave to soak
The solution remains in the appliance for a month at a time at a constant temperature of 185° F.
All items removed from the unit are fully sanitized and bacteria free. A light rinse is required before using items.
•Aerobic bacteria - Nil
•Anaerobic bacteria - Nil
•E. Coli - Nil
•Staphyllococcus - Nil
•Streptococcus - Nil
•Listeria Monocytogenes - Nil
•Pseudomonas Aeruginosa - Nil
Operating instructions are clearly marked on the end cap labels in English, Spanish and French.
Fill the unit with fresh water to the -H2O- fill line. It is preferable to use hot water because the operating temperature will be reached quicker.
Add the appropriate number of boxes of CarbonZyme™ into the water speading evenly. Avoid spalshing.
The unit has a lifting basket inside. Stir up the solution by slowly and gently raising and lowering the basket.
Items are loaded into the unit and left to soak for varying lengths of time. The time in the appliance will be determined by the amount of Carbon build up. A light rinse is required before using items. Use the lifting basket to immerse items into the unit. There are a number of slots in the basket side arm. Raise and lower to the appropriate slot to faciliate filling and emptying.
Remove the items and rinse off any carbon residue. Heavily carbonized equipment may need an additional soak.
At the end of the monthly cycle, the Refill Indicator will change from Green to Red. This indicates that the Monthly Refill of CarbonZyme is due.
Switch the unit off and unplug it. Let it cool down overnight.
Collect any Fats, Oils & Grease that appears on the surface and throw into the trash.
Remove any items that remain in the unit.
Drain Down Regular Floor Drain
Screw the Adaptor into the ball valve.
Connect the hose to the adaptor.Place the end of the hose into the floor drain.
Open the valve slowly.
When the solution has drained, remove the basket and clean in the sink.
Collect any sludge that accumulates in the trough at the bottom of the unit.
Rinse the inside of the unit with clean water until it is thoroughly clean.
Close the ball valve.
Replace the basket.
Fill the unit with clean fresh water (preferably hot) to the -H2O- fill line.
Add the appropriate number of boxes of CarbonZyme by spreading evenly.
Plug the unit in and switch on!